AX PRO reports Low Battery: what should I do?

← Back to customer support

AX PRO alarm · Updated 16 November 2026

Identify which device needs attention before choosing a battery or opening a cover.

Applies to: AX PRO alarms with battery-powered detectors, contacts, keyfobs or sirens. Batteries and opening methods vary by model.

Follow these steps

  1. Open the alarm notification and note the device or zone name and exact message. Low Battery, Offline and Tamper are different faults.
  2. Confirm whether the alert concerns a peripheral or the main panel's backup battery. Send a device photo or model to Aladen to confirm the correct battery and service method.
  3. For an accessible, user-serviceable peripheral, disarm first and follow the exact model's manual. Opening a cover can still trigger tamper reporting while disarmed; arrange maintenance with Aladen and, if applicable, the monitoring provider before opening it.
  4. Use only the specified battery type and polarity. Do not assume all AX PRO devices use the same battery or substitute a rechargeable cell. Refit the cover and any retaining screw as instructed.
  5. Allow the device to report its restored status, then confirm both low-battery and tamper faults clear. Arrange a controlled functional test with Aladen before relying on the device again.

How to confirm it works

Confirm the correct zone is online and fault-free, and that the agreed test is received. Do not assume a cleared notification alone proves detection works.

When to contact Aladen

Ask Aladen to service a main-panel battery, mains-powered unit, high-mounted siren, damaged battery, unknown model or persistent fault. Do not bypass a zone or disable tamper protection just to clear a warning.

Need more help?

Have the device model, phone/app version, error screenshot, time of the problem and any recent network changes ready. Do not send passwords, verification codes or device QR codes.

0484 775 888

max@aladen.com.au · Contact Aladen

Related guides

ALADEN CUSTOMER SUPPORT

Everyday questions. Practical answers.

Start here for offline devices, recordings, family sharing, router changes, alarm batteries and intercom calls.

Hik-Connect shows Device Offline: what should I check?

Start by checking whether the problem affects the phone connection, the recorder, or one camera.

Read the step-by-step guide →
How do I find and save CCTV recordings?

Use Playback to locate the event, then save a short clip and check that the saved file plays.

Read the step-by-step guide →
How do I share Hik-Connect with family?

Share selected devices and permissions from the owner's account, rather than sharing the owner's password.

Read the step-by-step guide →
I changed my router or Wi-Fi: how do I restore access?

Wired recorders and Wi-Fi devices need different checks. Keep existing device accounts and recordings intact.

Read the step-by-step guide →
AX PRO reports Low Battery: what should I do?

Identify which device needs attention before choosing a battery or opening a cover.

Read the step-by-step guide →
My video intercom does not ring on my phone: what should I check?

Check local ringing, device connectivity and phone notifications separately.

Read the step-by-step guide →

Official references

Menus and features vary by model, permission and software version. Use the instructions for the installed model.