Kellyville Home CCTV Installation: Four Cameras, Four Clear Jobs

KELLYVILLE · TWO-STOREY HOME CCTV

Start with what each camera needs to see. For this two-storey Kellyville home, four cameras were planned around distinct jobs: the front entrance, driveway and front yard, rear entrance and backyard.

Project focus
Four cameras · Entry points first · Central Cat6 cabling

Watch the 54-second project video for installation positions and actual camera views. Select play, then full screen for a closer look.

What does each camera actually need to see?

“How many cameras do I need?” is a useful starting question, but it does not explain the job of each view. At this Kellyville property, we planned around how people approach the home, use its doors and move between indoor and outdoor areas.

The four cameras have different responsibilities, so the layout uses the budget across the entrance, driveway, front yard, rear doors, alfresco and backyard rather than concentrating similar views in one place.

Four cameras, four defined jobs

Camera position What the view is planned to show
Front balcony, near the left-side pillar Front door, visitors and the main entry path.
Front upper-floor eave, towards the right Driveway, front yard and the front-right section of the property.
Inside the alfresco, near the living-room door Rear entrance and the transition between indoor and outdoor areas.
Alfresco towards the backyard A wider view across the backyard.

Camera positions and actual views

These four photo comparisons pair each installation position with its recorded view. Select a photo to see it at full size.

Mounting height follows the task

The lower entrance view and higher front overview serve different purposes. The entry camera focuses on people approaching the front door; the upper view provides wider context across the driveway and yard. A suitable height and angle depend on the detail needed from that particular camera.

Plan the cable routes before installation

Cat6 cabling runs back to one central recorder location. Planning those routes alongside the camera positions helps coordinate the installation from the start.

Installation and cabling details

What this project illustrates

  • Follow people’s movement through entrances and exits.
  • Give every camera a clear purpose.
  • Choose mounting height around the required view.
  • Prioritise access points before general open areas.
  • Plan cable routes and the recorder location before installation.

Camera count alone does not show how useful a system will be. This project demonstrates a four-camera layout for this home; another property may need a different arrangement. The aim is to put the budget where it provides useful views.

Planning home CCTV in Kellyville?

Send your suburb, a floor plan or property photos, and the areas you want to see. We can discuss a suitable camera layout, cabling and recording arrangement before quoting.

Request a home CCTV installation quote → · 0484 775 888

Home CCTV installation in Sydney · Northbridge four-camera project · More real installation cases