I changed my router or Wi-Fi: how do I restore access?

← Back to customer support

Network & maintenance · Updated 16 November 2026

Wired recorders and Wi-Fi devices need different checks. Keep existing device accounts and recordings intact.

Applies to: Existing Hik-Connect installations after an internet, router, Wi-Fi name or password change.

Follow these steps

  1. Confirm the new internet connection works on a phone. Note what changed: provider, router, Wi-Fi name, password or all of these.
  2. For a wired recorder, connect its LAN cable to the new router's LAN or the existing network switch. A wired recorder does not normally need the Wi-Fi password, but may have network settings tied to the old router.
  3. For a device that actually uses Wi-Fi, update its Wi-Fi connection through the model's authorised network setup. Some devices require a particular Wi-Fi band or an on-site setup step; ask Aladen if the correct path is unclear.
  4. If the recorder remains offline, have Aladen or your IT contact compare its IP address, gateway and DNS with the new network. A static address or old direct-IP/port-forwarding setup may need a planned update.
  5. Keep the device in the existing Hik-Connect account. After the connection is restored, test live view using mobile data and check recent playback.

How to confirm it works

Verify remote live view, recent recording and any affected intercom call or alarm notification. Working phone internet alone does not prove the security system is connected.

When to contact Aladen

Send Aladen the router model, what changed and the offline screenshot. Leave factory reset, firewall rules, IP changes and managed network settings to an authorised person.

Need more help?

Have the device model, phone/app version, error screenshot, time of the problem and any recent network changes ready. Do not send passwords, verification codes or device QR codes.

0484 775 888

max@aladen.com.au · Contact Aladen

Related guides

ALADEN CUSTOMER SUPPORT

Everyday questions. Practical answers.

Start here for offline devices, recordings, family sharing, router changes, alarm batteries and intercom calls.

Hik-Connect shows Device Offline: what should I check?

Start by checking whether the problem affects the phone connection, the recorder, or one camera.

Read the step-by-step guide →
How do I find and save CCTV recordings?

Use Playback to locate the event, then save a short clip and check that the saved file plays.

Read the step-by-step guide →
How do I share Hik-Connect with family?

Share selected devices and permissions from the owner's account, rather than sharing the owner's password.

Read the step-by-step guide →
I changed my router or Wi-Fi: how do I restore access?

Wired recorders and Wi-Fi devices need different checks. Keep existing device accounts and recordings intact.

Read the step-by-step guide →
AX PRO reports Low Battery: what should I do?

Identify which device needs attention before choosing a battery or opening a cover.

Read the step-by-step guide →
My video intercom does not ring on my phone: what should I check?

Check local ringing, device connectivity and phone notifications separately.

Read the step-by-step guide →

Official references

Menus and features vary by model, permission and software version. Use the instructions for the installed model.